The dehumidification and dehumidification of the germplasm resource bank should focus on creating a stable and regular controlled environment while saving energy and making full use of the equipment.
There are different requirements for each room in the germplasm resource bank:
1, storage room. Storage room air conditioning system At home and abroad in recent years, the basic use of refrigeration and dehumidification equipment, sent to the storage room of low temperature, dry air should be distributed evenly, can not form a vortex. Therefore, the upper air supply and the lower air return are often used. There is a control room in or near the equipment room. The instrument can monitor or record the temperature and humidity of the storage room.
2, drying room and drying room. Drying room is usually set to constant temperature, humidity and humidity dehumidification unit, temperature and humidity generally controlled at +15 °C, relative humidity of about 15%. Drying studio temperature is generally 20 °C, relative humidity is about 30% This room in addition to set the automatic control device, but also should always check the seed temperature during the drying process changes, in order to prevent the automatic temperature control device failure and affect the drying, damage seed.
3, germination room. Often used cabinet type constant temperature, constant humidity unit, the unit is composed of two parts: compression condensing unit and air conditioner. The air conditioner is equipped with a fan, an evaporator, an electrode humidifier, an air filter, and an automatic control device. The unit is placed in a small room next to the germination room, and the indoor air conditions are processed through pipes to meet the requirements for seed germination.
With the rapid development of science and technology, the use of plastics in modern medicine is steadily increasing. Medical devices made from injection-molded plastics help reduce health care costs, infectious diseases and pain management. High-tech polymers are used in medical device prototyping and are often used to create improved prosthetics and devices to reduce the risk of infection. Medical plastic injection molding directly improves patient safety and the ability to save more lives. High-gloss injection molding: the basic process of high-gloss injection molding is to rapidly heat the surface of the mold with high temperature and high pressure steam before injection molding, so that the surface temperature of the molding mold cavity reaches above the glass transfer temperature (TG) of the resin plastic, and then inject the plasticized plastic melt into the closed mold cavity. During the injection phase, the mold temperature is kept constant by high temperature and high pressure steam. After injection molding, stop the air supply, blow out the steam in the tube with the air pressure of the duct, and then inject cooling water to make the mold temperature drop rapidly, until the mold is cooled and opened to take out the product.
Custom Plastic Parts,Custom High Precision Plastic Injection Molding,Precision Plastic Injection Molding Accessories,Plastic Injection Molding Tooling Parts
Suzhou Dongye Precision Molding Co.,Ltd. , http://www.dongyeinjectionmolding.com