Illustration of working principle:
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place.
Application: Chain Link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.
Advantages:
1. It adopts the technique of single model and double helix and it can improve the work efficiency greatly.
2. Japan Mitsubishi PLC (Programmable Logic Controller)
3. French Schneider inverter
4. Chinese top servo motor (make the production more precise).
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.
6. There is a controller cabinet hanging and it can set the length of the wire mesh, once the weaving finish, it will stop.
7. An alarm device has been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.
8.Speed of die:500r/min
II.Technical Parameter
| Model | LW30/80-3/4 | |
| Width scope of weaving | ≤3m/4m | |
| Mesh scope of weaving | 25mm-80mm | |
| Wire scope | 3mm | |
| Outside size | Main machine | 6700*1430*1800 |
| Net reel | 5100*1700*1250 | |
| Motor | Servo Motor | 5.5kw |
| Cutter | 1.5kw | |
| Rolling | 0.75kw | |
| Raw Material | Galvanized wire;PVC bag steel wire | |
| Diameter of Wire | Mesh opening size |
| 1.8mm | 30-40mm |
| 2.0mm | 30-50mm |
| 2.2mm | 30-60mm |
| 2.5mm | 40-70mm |
| 2.8mm | 50-80mm |
| 3.0mm | 60-80mm |
| 3.2mm | 70-80mm |
| 3.5mm | 80-100mm |
| 4.0mm | 100mm*100mm |
1. FOB CFR CIF price all available
2. Payment: 30% T/T in advance, the balance 70% by T/T after check the machine at seller's factory.
3. Minimum order quantity: 1Â set
4. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Country of origin: China
7. Our guarantee time: 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port, China.
8. Installation: we could arrange our engineer install the machine in our factory.
V.Contact Information
Â
Â
Â
Â
An excavator grading beam is a specialized attachment that can be fitted to an excavator. It is designed to help with grading, leveling, and excavating tasks. The grading beam is typically made of high-strength steel and is equipped with a series of teeth or blades that can be adjusted to different angles and depths.
The grading beam is attached to the excavator's arm, and the operator can use the machine's hydraulic controls to adjust the angle and depth of the teeth or blades. This allows the operator to precisely control the amount of material being excavated or leveled.
Excavator grading beams are commonly used in construction and landscaping projects, where they can be used to prepare building sites, level ground, and excavate trenches. They are also used in agricultural applications, such as land leveling and drainage work.
Overall, the excavator grading beam is a versatile and efficient tool that can help save time and effort on a range of excavation and grading tasks.
Grading Beam Excavator ,Excavator Grade Beam,Tilting Grading Beam,Rotating Grading Beam
CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.cattiltrotator.com