The bully arm-type garbage truck system products are mainly used for carrying garbage, bulk materials such as ash, sand, stone, earth, etc., as well as transporting ore or coal in mines or coal construction, using authentic Dongfeng Motor Company small. The chassis of the Fighter King achieves the country's three emission standards. The arm pit can be used with the ground pit of the garbage bucket.
| Chassis model | Dongfeng EQ1061T14DJ2A | |
| Volume (T) | 4-5 | |
| Vehicle parameters | Vehicle size (length, width and height mm) | 5880×2000×2850 |
| Total mass (kg) | 5840 | |
| Rated load mass (kg) | 1500 | |
| Service quality (kg) | 4220 | |
| Approach angle / departure angle (mm) | 19/15 | |
| Front suspension/rear suspension (mm) | 962/1918 | |
| Fuel type | Diesel | |
| 100 km fuel consumption (L) | 9 | |
| Maximum speed | 95 | |
| Engine parameters | model | 4100QBZL |
| Displacement/power (kw) | 3298/70 | |
| Manufacturer | Kunming Yunnei Power Co., Ltd. | |
| Type | Inline four-cylinder diesel engine | |
| Chassis description | Drive type | 4×2 |
| Wheelbase (mm) | 3000 | |
| Track (front/back) | 1404 / 1458 | |
| Front axle description | 1.5T | |
| Rear axle description | 3.0T | |
| Diverter instructions | Double-spoke steering wheel, recirculating ball steering gear | |
| Gearbox description | Five forward gears, one reverse gear, mechanical transmission, flexible shaft pull-type control. | |
| Clutch description | Monolithic, dry diaphragm spring clutch | |
| Braking system description | Hydraulic brake series, drum type; optional air brake. | |
| Cab | Flat single row | |
| Number of leaf springs (front/back) | 5/8+4,5/9,6/8+4 | |
| Tire specifications | 6.50-16 | |
| air conditioning | Optional | |
| Dedicated performance parameters | Hydraulic system working pressure | 16MPa |
| Lift arm circumference radius | 2400mm | |
| Hydraulic system flow | ||
| Lifting arm maximum swing angle | 145 | |
| Hoisting time | 30s | |
| Dump truck time | 50s |
There are many problems in the recovery of copper chips directly into the furnace, the recycling of copper brass chips reduces the production cost of foundry enterprises and greatly improves the market competitiveness of the enterprises. The copper scraps are small, loose, directly into the furnace will be seriously blocked, the material block clearance is the furnace gas rising channel, directly affect the smelting process, the loose steel scrap without pressing, extremely easy to float on the furnace lining, corrosion lining, and large loss of raw materials will cause low molten iron rate.
Copper Briquetter, Brass Briquette Machine, Copper Chips Briquette Machine, Copper Briquetting Press, Copper Briquetting Machine
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-briquetter.com