Techincal data:
| Fluid Pressure | Max 1.6MPa (232Psi) |
| Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, air |
| Body Material | CF8M/CF8 |
| Seals  Material | EPDM/FKM |
| Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
| Fluid Temperature |  -20ºC - +150ºC |
| Ambient Temperature | -20ºC - +80ºC |
| Control Type | Normally closed,Normally open,Double acting |
| Connection | Threaded(BSP,BSPT,NPT ) |
Advantages:
Small shape, large flux;
Perfect sealing, vacuum tightness 740mmHg (Mercury);
Any mounting position acceptable (horizontal, vertical, oblique).
Size: DN8 - DN50 (1/4" ~ 2")
Connection: BSP or NPT threaded
Control Type: Single acting, double acting
Body Material: CF8M (AISI316) or CF8 (AISI304)
Seat:
EPDM: Perfectly suitable for hot water and steam, unsuitable for mineral products (oils, greases, fuels etc. );
VITON (FKM): Perfectly suitable for most fluid, unsuitable for steam;
Fluid Pressure: Max 1.0MPa (10bar, 232Psi)
Fluid Temperature: -10 - +130ºC
Max. Viscosity: 600 mm2/s
Control Fluid: Neutral gas, air
Control Pressure: 0.3 - 0.8MPa.
CONTACT US
Techincal data:
| Fluid Pressure | Max 1.6MPa (232Psi) |
| Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, air |
| Body Material | CF8M/CF8 |
| Seals  Material | EPDM/FKM |
| Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
| Fluid Temperature |  -20ºC - +150ºC |
| Ambient Temperature | -20ºC - +80ºC |
| Control Type | Normally closed,Normally open,Double acting |
| Connection | Threaded(BSP,BSPT,NPT ) |
Advantages:
Small shape, large flux;
Perfect sealing, vacuum tightness 740mmHg (Mercury);
Any mounting position acceptable (horizontal, vertical, oblique).
Size: DN8 - DN50 (1/4" ~ 2")
Connection: BSP or NPT threaded
Control Type: Single acting, double acting
Body Material: CF8M (AISI316) or CF8 (AISI304)
Seat:
EPDM: Perfectly suitable for hot water and steam, unsuitable for mineral products (oils, greases, fuels etc. );
VITON (FKM): Perfectly suitable for most fluid, unsuitable for steam;
Fluid Pressure: Max 1.0MPa (10bar, 232Psi)
Fluid Temperature: -10 - +130ºC
Max. Viscosity: 600 mm2/s
Control Fluid: Neutral gas, air
Control Pressure: 0.3 - 0.8MPa.
CONTACT US
Relationship between dielectric loss and temperature and frequency of fluorphlogopite
The main performance of fluoride crystal mica used in the field of electrical insulation: The 13th Institute of Shijiazhuang, the CLP Group and the Second Aviation Academy of the Air Force
Institute of Fluid Physics, China Academy of Engineering Physics (Nine Institute of Mianyang), Institute of High Energy Physics, Chinese Academy of Sciences, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, National Synchrotron Radiation Laboratory, Hefei Institute of Physical Chemistry, Chinese Academy of Sciences , 50th Institute of China Electronics Technology Group Corporation (Shanghai), 23 Institute of the Second Institute of China Aerospace Science and Industry Corporation, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing Institute of Radiometrics, 12th Institute of China Electronics Technology Group (Semiconductor 12).
Mica Insulation Pad,Insulation Pad,Mica Insulation Film,Mica Insulation Material
Changchun City Taiyuan FluorphlogopiteCo. Ltd. , https://www.micaslice.com