It is very important to carry out daily inspection and replacement of various accessories in the garbage truck. It can improve the working efficiency of the garbage truck and prolong its service life, and it can prevent some risks from occurring. For maintenance-based, as the case of repairs; seven maintenance, three points to repair these new ideas have gradually been accepted by the majority of garbage truck owners. Here's to tell everyone about the daily inspection of garbage trucks .
The first thing to do is to check all the luminaires and warning devices, including reversing alarms and filling cues, and repair or replace them in time if a fault is found. The second is to regularly check the link of the garbage truck wiring harness, as long as the method is to visually check, to see if the garbage truck harness has cracking, loose, poor contact.
It is necessary to regularly check the tire pressure of the garbage truck and the wear of the tread pattern. If the nuts are loose, the inspection cycle is preferably performed once a week. The inspection method is visual inspection, and then let the garbage truck run up again to see if there is any deviation or drifting. If there is any of the above conditions, it must not be used recklessly or if there is a safety incident during the driving process. At this time, we must check the four-wheel-bit position of the garbage truck and the dynamic balance check. Of course, this must be done after the sale of the garbage truck manufacturer. After passing the straight road test, it can continue to travel on the road. Also check the condition of the oil and brake oil of the garbage truck once a week, and add and replace them in case of any shortage.
Always pay particular note is that garbage truck brake system, garbage truck brake is generated by friction braking effect. After a long period of use, the brake system of the garbage truck will be mixed with water and sediment and other impurities, resulting in a sharp decline in friction coefficient, so the braking effect will be reduced. During the course of driving and there may be a safety accident, resulting in the loss of life and property.
The above is a brief introduction to the routine inspection of garbage trucks. In daily life, we must strictly perform the inspection and maintenance of the parts mentioned in the article so that no problems can arise during the driving process. (Wen/Jun Xun)
Gabion & Reno mattress is
a galvanized double twisted hexagonal woven mesh compartmented basket
with a rectangular mattress shape. The compartments or cells of the reno
mattress are of equal size and dimension and are formed by internal
diaphragms. Gabion & Reno mattress have been used for channel
linings, river training, soil retention, slope stabilization and other
applications successfully throughout the world for over 100 years.
Double twisted gabion & reno mattresses offer many advantages, such as flexibility, durability, strength, permeability, ecology, reliability, longevity, low cost and an aesthetic appearance. The thickness of gabion mats is usually between 0.15-0.5m. It is similar to gabion box which could be divided by several cells and adopts thicker diameter wires to form mesh edge.
Features of Gabion & Reno mattress
Flexibility
One of the most important advantages of
gabion & Reno mattresses is their flexibility both for the
individual unit and the overall. The construction of the units permits
it to tolerate differential settlement without failure. This property is
especially important when a structure is on unstable soil conditions or
in areas where scour from wave action or currents can undermine the toe
of the structure and cause structural settlement.
Durability
Gabions & Reno mattresses built from
high strength double twisted hexagonal mesh filled with natural hard
durable stone and connected together to create a monolithic mass
structure capable of undergoing structural movement without any loss of
structural integrity creating a highly durable structure.
Strength
Gabions & Reno mattresses possess the
strength and flexibility to withstand forces generated by water and
earth masses. The most important and relevant strength characteristics
pertaining to gabion and reno mattress design standards are the mesh
punch strength, the mesh tensile strength, the pull apart resistance
strength of the mesh, and the corrosion resistance of the mesh. The
strength values of the double twisted mesh are located within the
individual product specifications for each product and are represented
in ASTM A975-97.
Reno Mattress Gabion Mesh,Wire Mesh Reno Mattress,Reno Mattress Gabion Box Mesh,Gabion Boxes Wire Mesh Mattress
ANPING KINDELONG WIRE MESH CO.,LTD. , https://www.apkdlwiremesh.com