- Model NO.: 120/70-12
- Diameter: 12′′
- Certification: ISO, CCC, ECE, SNI,Soncap,Inmetro
- Kind: Vacuum Tire
- Customized: Customized
- Condition: New
- Max Load: 272kg
- Max Pressure: 300kpa
- Specification: JIS, SONCAP, BIS, INMETRO
- HS Code: 40114000
- Type: Tubeless
- Tire Design: Bias Belted Tyre
- Tread Pattern: Dual Purpose Tread Pattern
- Tire Hierarchy: 6PR
- Cord Material: Nylon
- Rim Inches: 3.50
- Tyre Type: Tt/Tl
- Trademark: KEYSTONE
- Origin: China
1) Ply rating: 4PR/6 PR /8PR
2) Linear pattern
3)Excellent traction
4) Top quality with good Performance at thrust and wear-resistant, drainage good 5) Ensure run 22000km
6). Packing:
Motorcycle Tire:
Each tire packed colorful foil film then 5PCS into one bundle. 20GP: 3000PCS.
| Size | Ply Rating | Tube Type | Overall Diameter(mm) | Section Width(mm) | Rim inches | Max Pressure(Kpa) | Max load(kg) |
| 120/70-12 | 4 | TT/TL | 473 | 122 | 3.50*12 | 250 | 195 |
| 6 | TT/TL | 473 | 122 | 3.50*12 | 280 | 236 | |
| 8 | TT | 473 | 122 | 3.50*12 | 300 | 272 |
Teflon is Polytetrafluoroetylene, referred to as Teflon, PTFE, F4, etc.It is also known as Teflon, Teflon, Teflon, Teflon and so on because of its pronunciation.Polytetrafluoroethylene (ptfe) is a kind of plastic, which is used to manufacture heaters. It has been successfully used in chemical equipment heating. It has the characteristics of multi-layer and three-dimensional heating.
The working pressure, working temperature, heat transfer coefficient and installation method of the teflon heater vary greatly according to different types, different shell materials and different thermal media.The chemical properties of teflon are very stable and the corrosion resistance is especially good.The surface of the teflon tube is smooth and moderately flexible, so it is not easy to scale due to the slight vibration when using it.The teflon heater is small in size and compact in structure. The heat transfer area per unit volume of the equipment is more than 4 times of that of the shell heater.Flexible teflon tubes work safely under shock and vibration of fluids, and the tubes can be made into special shapes as needed.Teflon has low thermal conductivity, poor mechanical properties than metal, and is not resistant to high temperature.The use of small diameter, thin wall, although the thermal conductivity and mechanical properties of compensation, but can only be used in the case of low pressure and low temperature.The production of teflon steam heater and teflon hot water heater has become more and more mature, and widely used in chemical industry, medicine, pickling and other corrosive industries.
PTEF Immersion Heaters, PTFE Immersion Heater Element, Fluoropolymer Heaters, PTFE
Guangzhou Quanxu Technology Co Ltd , https://www.inkjetcoating.com