Stainless steel cleaning agent is mainly used for stretching oil, lubricating oil and other oil stains and stain cleaning agents. The use of stainless steel has become more extensive with the development of the economy. People are closely related to stainless steel in daily life, but many people have stainless steel. There is not much understanding of performance, and there is even less maintenance on stainless steel. Let's take a look at the small series below. 
Introduction:
Stainless steel degreasing cleaning generally uses water-based cleaning agents, such as CLF-700 on the market, and some solvent-based cleaning agents, such as white electric oil. Stainless steel cleaning agent is mainly used for cleaning oil stains such as stretching oil, cutting oil, stamping oil, anti-rust oil, lubricating oil and other oil stains and stains on stainless steel surface.
Hand cleaning by hand : Use a tool such as cloth to directly clean the surface of the stainless steel. After washing, rinse or rinse with water.
1. Immerse at room temperature: mix the stainless steel cleaning agent with clean water, then directly soak the stainless steel workpiece into the cleaning solution. After 1-5 minutes, the cleaning is completed, then rinse with water or rinse.
2. Warming soaking: Warm the stainless steel cleaning solution that has been watered, then soak the workpiece in about 5 minutes, rinse it with water or rinse it off.
3. Spray cleaning: spray cleaning with a spray cleaning machine.
4, mechanical cleaning: small workpieces should be mechanical vibration mixing cleaning.
5. Ultrasonic cleaning: Add the prepared stainless steel cleaning agent to the ultrasonic cleaning tank for ultrasonic vibration cleaning.
1. Water-based stainless steel cleaning agent on the market generally uses a ratio of 1:20. This ratio has been industrialized. Of course, there are also some bad merchants who give their customers a self-diluting detergent to obtain unreasonable profits.
2, the pH value of stainless steel cleaning agent is different for each manufacturer, depending on the formula. Usually at 7-12. That is, it is neutral, weakly alkaline, and strongly alkaline. Individual effects may be acidic.
3. The debris and oil floating objects and residues in the tank should be cleaned regularly to prevent debris and residues from reducing the concentration of the bath.
4. When the cleaning ability of the working fluid is found to decrease, the new liquid can be used to resume use.
5. After using the working fluid for a period of time, the impurity concentration increases due to the decrease of the effective concentration, and the treatment effect is not good. There is also no need to replace the new liquid, just add a small amount of cleaning agent.
The stainless steel protector is formulated for the weakness of the stainless steel material, which is easy to trace and lose light. It removes the oil stain, oxide formed on the surface of the stainless steel product and is polished and polished back into one. It is easy to use, saves time, labor, does not stab the skin, and has no pollution to the environment. Keep it clean and keep it fresh.
Tungsten carbide mixed Metal Alloy Powder is commonly used in PTA (Plasma Transferred Arc) welding. PTA welding is a process that involves the deposition of a hardfacing material onto a base metal to provide wear resistance, corrosion resistance, and improved mechanical properties.
Tungsten carbide is a very hard and wear-resistant material, making it ideal for applications where high abrasion resistance is required. It is often mixed with other metals, such as nickel, cobalt, or chromium, to form a metal alloy powder. These metal alloys enhance the properties of the tungsten carbide and improve its compatibility with the base metal.
The tungsten carbide mix metal alloy powder is typically fed into the PTA welding torch, where it is melted and propelled onto the surface of the base metal using a high-energy plasma arc. The molten powder forms a hard, dense coating that bonds with the base metal, providing excellent wear resistance and protection.
The specific composition of the tungsten carbide mix metal alloy powder can vary depending on the application requirements. Different ratios of tungsten carbide and other metals can be used to achieve desired properties, such as hardness, toughness, and corrosion resistance.
Overall, tungsten carbide mix metal alloy powder is a versatile and effective material for PTA welding, offering superior wear resistance and protection for various industrial applications.
Mixed Powder,Arc Welding Powder,Pta Welding Powder,Plasma Welding Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.egretgeotools.com