Multi-Function Electric Ceramic Tile Cutting Machinestone Dust-Free Saw

Full set including
 
     main body machine 
    1000 mm blade *1 pcs
    orbital 10 meters (alternate)
    a main motor, a walking motor
    Our factory produce mining quarrying machine, machine flexible, mobile convenience, low prices,many functions.e  It is suitable for small-scale mining stone material with high efficiency, large mining use small pieces of waste material, can be widely used in the tuff, granite, marble mine cutting production.
    In our local tuff, for example, it is soft rock, 8 hours a day can cut tuff 200-300 meters (about 35 cm deep). High efficiency, high stone yield rate, energy saving.
 
Technical parameters
 
cutting mountain depth: 35 mm
cutting length/width: unlimited
His main motor: power 11 kw
Derive water consumption: 3 m3 / h(water lubrication requires can saw blade, cooling, dust removal )
His host weight: 85 kg
Derive the total weight: 370 kg
 
Feature
1) improve the utilization rate of natural resources:
    the mining quarrying machine directly in the ore rock cutting, yield more than 90%, while traditional quarrying method combining use thermal cutting - Fried - blast - break, yield only 30% to 30%.
 2) less pollution, our mining quarrying machine adopts wet operations, water spewed from sawing plate edge after direct sawing plate and stone material, cut like a sharp sword bean curd, no broken stone, and a little stone slag, little dust, no smoke.
3)safety
4)save time and cost
The quarrying machine on the track to walk, just 1-2 workers each auxiliary operation can quarrying, maximum extent, reduces the labor intensity of operators.
 
Detailed picture




 

Construction Hoist Electrical Parts

Some common electrical parts used in construction hoists include:

1. Control panel: This is the main electrical component that allows the operator to control the movement of the hoist. It typically includes switches, buttons, and indicators for various functions such as raising, lowering, and stopping the hoist.

2. Motor: The motor is responsible for providing the power to operate the hoist. It converts electrical energy into mechanical energy to lift and lower the load.

3. Limit switches: These switches are used to set the upper and lower limits of the hoist's movement. They help prevent the hoist from overtraveling and causing damage.

4. Emergency stop button: This is a safety feature that immediately stops the hoist's operation in case of an emergency or malfunction.

5. Overload protection: This is a safety mechanism that automatically stops the hoist if it exceeds its maximum load capacity. It helps prevent accidents and equipment damage.

6. Electrical cables and wiring: These components connect the various electrical parts of the hoist, allowing for the transmission of power and control signals.

7. Circuit breakers and fuses: These protective devices are used to prevent electrical overload and short circuits. They automatically cut off the power supply in case of excessive current flow.

8. Voltage regulator: This device ensures a stable and consistent supply of electrical power to the hoist, protecting it from voltage fluctuations.

9. Sensors: Various sensors, such as proximity sensors or limit switches, are used to detect the position, speed, or presence of objects in the hoist's path. They provide feedback to the control system and help ensure safe and efficient operation.

10. Wiring connectors and terminals: These components are used to connect and secure the electrical wires in the hoist, ensuring reliable and safe connections.

The specific electrical parts used in a Construction Hoist may vary depending on the manufacturer and model. It is always recommended to refer to the hoist's user manual or consult with a professional for accurate information.

Construction Hoist Motor,Construction Hoist Limit Device,Construction Hoist Electric Parts,Construction Hoist Reducer,Sliding Contact Line

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com