Self-driving tour is a very popular vacation mode nowadays. The Dragon Boat Festival is coming soon. It is also a period of great self-driving tour. With wives and belts, Hupenghuanyou are enjoying themselves. However, do not forget to make preparations before you set out. Among them, the inspection of vehicles is essential.
So how do you do a good job in vehicle inspection and maintenance?
1. Power system
Check engine oil, tank level. If it is an automatic transmission model, it is also necessary to check whether the speed change mailbox is missing, and if it is over-consumption, it should be promptly replenished.
If the self-driving tour is longer, it is better to replace the engine oil because the high temperature work of the engine may deteriorate the engine oil. It is also important to note if the engine belt is loose. If you need to clean the engine and radiator on the way, remember to go to a professional dealer for professional cleaning.
2, chassis system
The ongoing impact of the journey along the chassis may change the four-wheel alignment and lead to abnormal wear of the tires. Therefore, when the journey is back, do not forget to make a four-wheel alignment for the car according to the situation. If it is vibrating along the way, it may damage the steering system and you should observe whether there is looseness in the ball of the steering gear. Chassis parts of the screws should also be checked and tightened.
3, tire condition
Measure the air pressure of the tires and keep the same tire pressure for four rounds; ensure that the tires have the same frictional force to ensure driving safety.
4, brake system
This can be very critical. Check carefully before departure. If abnormal noise occurs when you step on the brake, you must go to a professional store to check and replace the brake pads. If there is a brake during driving, be sure to take it seriously. Do not be lucky.
For most car brands, the headlight is just a part of the car, and its meaning is not much different from other parts, but Audi is different, it has a unique view on the design of the car headlights.
In the 1990s, like most car brands, Audi lights used halogen light sources as the main lighting source for Audi headlights.
At the North American International Auto Show held in 2003, Audi brought the Pikes Peak quattro concept car (the predecessor of the Audi Q7). One of the most prominent designs was to change the round fog lights to narrow strips and integrate them With the addition of LED light sources, this is the earliest prototype of daytime running lights.
In 2005, Audi shifted its focus to the taillights and tried to equip the A6 Avant with LED taillights. Compared with traditional taillights, Audi LED taillights are better in terms of light source intensity, and can also have extremely high penetration in extreme weather. Some people even joked a little, "No matter how far away or how poor the line of sight is, as long as there is a little light in front, don`t think about it, it must be an Audi car."
Since then, Audi has been fascinated by "lights", and has gone further and further on the road of headlight R&D and design, such as Audi LED headlights, Audi dynamic flow turn signals, Audi laser headlights, Audi matrix headlights, and now Audi LED matrix laser headlights all reflect Audi's obsession and attainments in the field of lighting.
audi a6 headlight,audi light,audi headlights,audi lights,audi laser headlights,audi laser light
PNP Car Light & MAYLERESCAPE LIMITED , https://www.pnpcarheadlights.com