How much do you know about the maintenance of a constant temperature culture shaker ?
1. Our experience is that it is best to heat the water when replenishing the water to reach the temperature of the incubator.
2 , first wipe the inner wall with 75% alcohol, ventilation for 10 minutes, ultraviolet radiation can be 30 minutes.
3 , fumigation after blowing a day is definitely not enough, at least for a week before you can let the formaldehyde cleared up, or cell length is not good.
4. Some temperature-controlled culture shakers can heat the inner wall to 90 degrees, and some also have ultraviolet function. Conventionally, one should use alcohol to scrub the inner surface once a week.
5. Our usual treatment is to wipe the inner wall with 75% alcohol, then fumigate with formaldehyde potassium permanganate for one night, and then ventilate for a whole day.
6. The best thing is to keep the routine. The role of copper sulfate is to inhibit the growth of bacteria, because the incubator now has antibacterial function.
7 , the incubator out of the plate out of high pressure, the wall with 75% alcohol wipe it again, use Shile music to wipe it again, and then take a night UV, the effect is very good.
8. After autoclaving the plate, add an appropriate amount of sterilized double-distilled water or raw saline to the sterile operating table, plus a small amount of benzalkonium chloride. Concentration does not matter. Cells can be grown.
It is a white inorganic pigment with non-toxic, best opacity, best whiteness and brightness, and is considered to be the best white pigment in the world today. Titanium white has strong adhesion, is not easy to change chemically, and is always white. Widely used in coatings, plastics, papermaking, printing inks, chemical fiber, rubber, cosmetics and other industries. It has a high melting point, and is also used to make refractory glass, glaze, enamel, clay, high temperature resistant laboratory utensils, etc.
Anatase titanium dioxide belongs to pigment grade titanium dioxide, which has the characteristics of strong hiding power, high coloring power, and good weather resistance. Mainly used in industrial sectors such as rubber, plastics, papermaking, printing inks, coatings and chemical fibers.
The use of anatase titanium dioxide mainly has the following aspects: Titanium dioxide for papermaking generally uses anatase titanium dioxide without surface treatment, which can play the role of fluorescence and whitening, and increase the whiteness of paper. The titanium dioxide used in the ink industry has rutile type and anatase type. It is an indispensable white pigment in advanced inks. The titanium dioxide used in the textile and chemical fiber industries is mainly used as a matting agent. Since the anatase type is softer than the gold red type, the anatase type is generally used. Titanium dioxide is not only used as a coloring agent in the rubber industry, but also has reinforcing, anti-aging, and filling functions, and is generally based on anatase.
Anatase Titanium Dioxide,Titanium Dioxide Anatase,Anatase Titanium Dioxide For Rubber,Anatase Titanium Dioxide Powder
Henan Shunbang Chemical Industry CO.,Ltd , https://www.sblubricant.com