People in the industry should all know that the cutting demand of CNC plasma cutting technology is relatively high. If the plasma arc is not strong, the cutting effect will be poor. What are the factors that influence the cutting action in the CNC plasma cutting machine? The answer is plasma arc plasma power supply (HPR130 \ 400 \ 800XD \ MAX85 \ 65 \ 45 electrode nozzle), the other is to grasp the parameters of the cutting process. Operators who have an excellent grasp of the plasma cutting industry will be able to cut out good, high-quality goods and high-quality goods. We will enhance plasma arcs, which will increase plasma cutting speed and increase cutting quality.
In order to obtain products that satisfy our needs in the operation of CNC plasma cutting machines, it is necessary to enhance the plasma arc (1650 electrode 220037 nozzle 220011). How can we obtain a strong plasma arc? The simple answer is to make the plasma arc highly compact so that we can get the plasma arc we need. Other cutting nozzles equipped with cutters must use smaller nozzle apertures and longer channel lengths to enhance the cooling effect. By operating this step, the current flowing through the useful section of the nozzles can be added. The power density of the arc increases. Although various tests were performed on the CNC plasma cutting machine, a lot of information was changed. The plasma arc of the tight plasma arc loss is still present. The loss of plasma arc is between 20% and 45%. The energy loss of water compaction plasma arc cutting is lost. The rate will be greater. Therefore, in the selection of technology, the production costs and losses will be considered. It is a good choice to choose the best plasma cutting method for the max 85 electrode 220842 nozzle 220816.
In the CNC plasma cutting, there will be large and small cuts and normal cutting conditions at the cutting port. Generally, the metal cutting below 50 mm will show the situation of large and small; when the plate thickness is less than 1 mm, the angle error of the cutting port is added from 3-4 degrees to 15 -25 degree. This condition is due to the unbalanced heat input of the plasma jet on the cut surface, ie, the release of plasma arc energy at the upper part of the cut is more than the lower part. That is, when the plasma arc is added, multiple points will appear. Ultimately, we will also add more capital when we are looking for the perfect cutting quality. So when cutting plasma cutting, we must change the cutting according to actual needs. technology. In this way, we can reduce production costs and increase production power while ensuring quality. CNC cutting machine, CNC plasma cutting machine, CNC flame cutting machine is willing to be your most faithful brother of communication.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
Rear Windshield Wiper,Aero Wiper Blades,Wiper Price,Wiper Blade Sizes
Taishan Yuanjin Auto Parts CO., LTD , https://www.yuanjinautoparts.com