Positive displacement pump specialist ROBBINS & MYERS has introduced a non-intrusive pressure sensor that protects the pump under dry operating conditions and under high pressure conditions.
Designed to fit at the pump outlet, the RM pressure sensor is considered to be the most effective way to prevent the pump from interfering with operation, as opposed to other conventional 'presence / disappearance' detectors, stator temperature probes and other jamming devices.
At the same time, positive displacement pumps are considered as one of the most versatile pump designs with the following advantages: They handle abrasive fluids with minimal wear; accurately measure viscous liquids; and deliver extremely sensitive products with major limitations (Just like most pump products) are run dry. However, using RM pressure sensors is one of the most effective ways for users to protect their positive displacement pumps or other processing equipment during dry operating conditions or high / low pressure conditions.
The device consists of sensors, pressure switches and control box composed of three basic components. The sensor is mounted between two standard ANSI flanges to allow fluid flow to be unobstructed. Pressure detection throughout the piping system ensures that the enclosure, fixture, or jumper does not affect the pressure reading. A further feature is the presence of a liquid-filled manometer that visualizes the pressure throughout the pump system.
I want to comment View comments Global Hardware Network solemnly declare: Global Hardware Network reproduced works are marked with the source, this site does not indicate the source and reproduced, is for the purpose of passing more information, does not mean agree with their views or confirmed The authenticity of its content. If the reprinted work infringes on the author's signature right, or has other harm such as copyright, portrait rights, intellectual property rights, etc., it is not intentionally done by Ben Wang. Upon receiving the notification from the relevant obligee, it will be immediately corrected.
In terms of building materials, industrial products, daily necessities, floor leather, floor tiles, artificial leather, pipes, wires and cables, packaging films, bottles, foaming materials, sealing materials, and fibers, PVC was the world`s largest production of general-purpose plastics, and its applications are very widely. Widely used in all aspects
PVC is a white powder with an amorphous structure. The degree of branching is relatively small. The relative density is about 1.4. The glass transition temperature is 77~90°C. It begins to decompose at about 170°C. It has poor stability to light and heat. After prolonged exposure to sunlight, it will decompose to produce hydrogen chloride, and further automatically catalyze the decomposition, causing discoloration, and the physical and mechanical properties also rapidly decline. In actual applications, stabilizers must be added to improve the stability of heat and light.
The production process of PVC Resin SG8 and PVC RESIN SG5 is basically the same, and the production equipment is exactly the same. The main difference lies in the formulation of additives, polymerization temperature, reaction pressure and so on. The reaction temperature and reaction pressure of SG-8 resin have basically reached the working pressure limit of the polymerizer. The reaction requirements are relatively strict, and the requirements on operation, safety, technology, and personnel quality are more stringent, and the resin quality is more difficult to control.
PVC RESIN SG8,Pvc Resin Sg8,Pvc Resin K58,Suspension Pvc Resin
Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com