Flow measurement be application for
1 Gas in industrial pipelines
2 Air during gas combustion
3 Flue gas out of chimneys
4 Waterfall gas during water treatment
5 Gas and compressed air during production of cement, cigarette and glass
6 Natural gas, coal gas, liquefied gas, flare gas and hydrogen gas etc.
7 Flow measurement of trapped gas in steelworks
This flow meter can directly measure fluid mass flow without requiring temperature and pressure compensation. Its conspicuous features are as follows: Direct trade settlement, no movable components, small pressure loss, wide range ratio, high accuracy, high reliability, simple installation and convenient operation. It is extensively used in the industries such as petroleum, chemical industry, medical industry, heat power plant and environmental protection etc.
| Item | Thermal gas flowmeter |
| Measurement range | (0~60) Nm/s (standard state: 20C, 1.0133Mpa) |
| Ambient temperature | -40C~+85CÂ Degr. |
| Medium temperature | -10C~+350C Degr. |
| Accuracy | ± 1%reading; ± 0.5%full range |
| Repeatability | ± 0.5% full range |
| Output | Flow velocity: (4~20) mADC; temperature: (4~20) mADC; |
| Temperature coefficient | 0.05%/10C Degr. |
| Output impedance | Rmax: (Vs -12)/0.02(Ω ), where Vs is supply voltage. |
| Response speed | 1S |
| Power supply voltage | 24VDC± 10%; 220VAC± 10% |
| Working pressure | 1.6Mpa (when exceeding 1.6Mpa, an agreement can be signed for goods supply) |
| Communication interface | RS232 or RS485 can set and adjust all parameters and monitor master variables |
| Display interface  |
LED and buttons allow users to set flow rate range and alarm points and to calibrate the parameters such as flow rate and temperature etc on site |
| Explosion proof certification | idIICT4 (except for acetylene gas) |
| Protection class | IP67 |
The Insert Molding process starts off by either inserting the metal inserts before the custom Injection Molding process, or they can be inserted during the custom injection molding process. If the inserts are chosen to be inserted during the Plastic Injection Molding process, an Insert Moulding process operator or a robotic arm will load them. If chosen to insert the metal inserts after the plastic injection molding operation, the same robotic arm or Insert Molding process operator will load them after the plastic injection molding process is complete.
Insert molding (moulding) can be used in automobile, cooking ware, household equipment, instruments, devices, knobs, electrical components and more industrial.
FCE have been worked for many years for the different kinds of insert molding, such as electrical handle tool, automotive components etc. we ever gave many suggestions to our customer to save cost but quality gurannteed at the project beginning. It is a win to win cooperation with client.
Insert Molding,Insert Injection Molding,Plastic Insert Molding,Metal Insert Plastic Injection Molding
Suzhou FCE precision electronics Co., LTD , https://www.fcesz.com