Some drivers with short driving experience learn to drive, but they often develop bad habits when driving a refrigerated truck . In the early driving process, they speed up the speed in time, and when there are some more urgent situations, emergency The brakes, although lucky enough to pass through the danger, were regretful when they were not so fortunate to have caused a traffic accident. So what are the skills for braking when driving a refrigerated truck?
1. It is dangerous when there are floating sand on the road surface or on some dirt roads in rural areas. Not only these road conditions, but also some of the road on both sides of the asphalt and asphalt road will have some Accumulation of sand, so be careful when using emergency brakes in such situations.
2. When a refrigerated truck is making a turn, it is necessary to pay attention to the operation of the brake. When the brake is applied, the refrigerated truck will lose its focus easily, so when the vehicle enters the curve, it needs to use the brake. Full and effective reduction of speed.
3. Release the brakes before refrigerating the vehicle completely stopped. If the purpose is to drive the refrigerated vehicle , the brakes will always be depressed and the refrigerated vehicle will stop driving. This will cause a great impact. Forces and skills to use the brakes require that the brakes be released once before the vehicle is completely stopped, and then braked at a light point until the vehicle is completely stopped.
4, when the driver has a relatively high braking skills, the long-distance light braking is not brought to the front passenger seat or people who ride the vehicle feel a strong impact. However, the premise to be able to have this feeling is the need to be able to properly and accurately grasp the traffic conditions of the road ahead and the road surface. The first step is to release the accelerator pedal and then apply the brakes based on the speed and distance.
5. When the refrigerated truck is driving a downhill section and also uses an engine brake together, the braking system of the refrigerated truck will directly affect the performance of the brake due to excessive heat generation when the brake is used for a relatively long time. Therefore, it is possible to select the gear position of the transmission between 1/2/3 gear depending on the installed road surface, and it is possible to control the vehicle speed using the legal brakes of the next vehicle.
We are a manufacturer of FRP Pressure Tank and FRP Membrane Housing. The working pressure of the FRP softener tank is designed to be 125PSI and 150PSI. The liner of the FRP Filter Tank is made of food-grade PE raw material, blow molding/rotomolding integrated molding process, epoxy resin + glass fiber winding reinforcement, automatic CNC winding is more accurate and the quality is better. Stable and more efficient, the tank mouth is connected with threaded or flanged joints, and has passed NSF, CE, ISO9001 certification. Passed more than 100,000 times of fatigue tests, more than 4 times the burst pressure.
Frp Pressure Tank,Frp Tank,Frp Softener Tank Water Filter,Frp Softener Tank,Frp Filter Tank
Hebei Chengda Water Technology Co.,Ltd. , https://www.arclionchengda.com