The first step to safely drive a sewage truck or garbage truck is to carefully inspect before starting. If you do not develop the habit of checking before starting, it will cause safety hazards while driving.
In general, the following inspections must be carried out on sewage trucks and garbage trucks before starting.
1) I Check the status of each lamp of the sewage suction truck and garbage truck, especially if the brake and turn signal lights are working properly.
2) II Control whether the sewage suction truck and garbage truck braking device work well, including the inspection of brake, brake fluid level and brake taillight.
3) III Check the fuel quantity.
4) IV Check if the rearview mirror position is correct.
5) V Check whether the sewage suction truck, garbage truck headlights, rear taillights, brake lights and windscreens are clean.
6) VI checks the suction truck, garbage truck tire pressure and tread is normal.
7) VII Check whether the surface of engine oil of the sewage suction truck and garbage truck meets the requirements.
8) VIII Check whether the wiper and windshield washer fluid level and working conditions meet the requirements.
9) IX Check whether the bolts and nuts on the exposed parts of the sewage suction truck and garbage truck are safe.
10) X super engine, check the engine running is normal, there is no abnormal sound, the instrument, the warning light is working properly. Sewage suction truck, garbage truck manufacturers network
When the sewage suction truck and the garbage truck start, they must first look at the tachometer and start it again. Otherwise, they always use the starting opportunity to burn the starter.
(1) Check the sewage suction truck and the garbage truck chassis: In the safety inspection plane, drive the vehicle at a speed of 20 km/h or less while checking the chassis parts and find that the fault should be promptly removed.
(2) Check the direction of the sewage suction truck and garbage truck and check the steering wheel to see if there is abnormal swing, natural sideways or heavy operation.
(3) Check the sewer truck and garbage truck brakes: Check whether the brakes are functioning properly or not.
(4) Check the sewage suction truck, garbage truck meter and indicator lights: For the dashboard lights or warning lights in the car there are meters, but also to check whether the positive
Counter Current Cooling Tower has higher efficiency of the same volume, and offers larger water temperature difference. But it also comes with several disadvantages:
1.The unequal height between the air inlet and the water eliminator makes up the big Counter Current Cooling Tower and its high power consumption.
2.Meanwhile, the tower adopts nozzles to distribute water, which needs high pressure requirements and are easy to be blocked.
3.The entire tower body of the countercurrent tower is a closed structure, and it must be shut down when the equipment is overhauled or routinely maintained.
4.In addition, the rapid loss of water in the lower tank is very large, and it is easy to form water mist around the cooling tower, which is easy to cause the reproduction of legionary bacteria.
Counter Current Cooling Tower,Induced Draft Cooling Tower,Forced Draft Cooling Tower,Induced Draft Counterflow Cooling Tower
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com