At 9:00 a.m. that morning, in the Jingxing Science and Technology Reduction Furnace Workshop, the first 36 polysilicon rods that melted and cooled in the furnace during the six-and-a-half-hour period were uncovered as the first reduction furnace bell was slowly lifted. Mysterious. These silicon rods are grayish-gray, about 2.1 meters long and 12 cm in diameter, with a total weight of about 2 tons.
Xu De, head of the company, said that they will increase the polysilicon production capacity to an annual output of 3,000 tons, and launch the production of single crystal pulling rods, slicing, etc., to extend the industrial chain, increase product added value, and make the company bigger and stronger.
Field Pipe Fusion Equipment fuses HDPE / poly / polyethylene pipe and fittings. The aluminum inserts of thermoplastic welding machines can be made in Metric size or IPS size. Wuxi Yuda HDPE Pipe Welding Machines can weld metric size from 40 to 3000mm. How do you fuse HDPE ? Generally speaking, HDPE pipe is butt fused by applying heat to prepared pipe ends and then pushing the pipe ends together with a pre-determined force to make a permanent butt fusion joint. It is a very simple process utilizing a properly sized butt fusion machine for the pipe size to be joined. The Metric HDPE Fusion Machines included:
1. Basic frame– machine body with 4 clamps
2. Complete set of clamp/ metric insert set
3. Heating plate
4. Planing tool
5. Support with electric box for heating plate and planing tool
6. Hydraulic Unit
7.Plasitc welding tools (optional)
Metric HDPE Fusion Machine,HDPE Fusion Machine,HDPE Pipe Welding,HDPE Welding Machine
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com