Coiled Tubing Tools Swivel Joint Motor Running/Pulling

Model NO.: CTTM
Standard: API 11d1
Trademark: Serva
Transport Package: Export Standard
Origin: China
Model NO.: CTTM
Standard: API 11d1
Trademark: Serva
Transport Package: Export Standard
Origin: China
COILED TUBING TOOLS

LOCKING SWIVEL JOINT
The Locking Swivel Joint was designed to allow the assembly of long coil tubing strings with minimum lubricator length. Many times it is necessary to have long lengths of lubricator to accommodate the tool string, creating a difficult and dangerous situation.
Now with the Locking Swivel Joint, it allows for sections of the tool string to be made up and lowered into the well bore. The String is spaced out and a pup joint is inserted, allowing the pup joint to seal in the rams of the BOP. The Locking Swivel is placed on top of the section of tools and dropped in the lubricator. Pull the coupling back and tighten the set screws, allowing the clutches to disengage and letting the swivel free spin.
The other section of tool string can now be assembled. Before lowering the swivel in the hole, loosen the set screws so the coupling can slide back down, engaging the clutches. If rotation is required in the tool string, simply take the brass drive pins out from under the coupling and this will prevent any back torque through the string. If run below the motor the clutches must be engaged and brass drive pins installed.
SPECIFICATIONS
Part Number Max OD Min ID Thread
(in) (in)
D97-3168-500 1.687 0.531 1" AMMT
D97-3175-500 1.750 0.560
D97-3212-500 2.125 0.812 1.5"AMMT
D97-3225-500 2.250
D97-3287-500 2.875 1.000 2 3/8"PAC
D97-3312-500 3.125 1.500 2 7/8"PAC
D97-3350-500 3.500

MOTORHEAD ASSEMBLY 
The Motorhead Assembly (M.A) has been developed in recognition to industry demands for compact, heavy duty, integrated BHA components. The M.A combines the Double Flapper Check Valve with the Heavy Duty Hydraulic Disconnect and the Dual Circulation Valve, standard components for virtually all tool string designs. The tubing connector has been deliberately eliminated to give the added flexibility of operator choice for the connector type and coil tubing size.
The M.A. provides the operator with a compact, versatile, upper BHA and offers the following features:
  • The M.A's compact design gives an overall length saving of approximately 30% over the use of conventional individual components.
  • The high torque capability of the M.A. provides the ideal Motorhead for today's high demand coiled tubing drilling applications.
  • The choice of tubing connector is not dictated by the M.A., therefore giving the operator the flexibility to choose the most appropriate connector to suit the application.
  • With a considerable reduction in the number of component parts, seals and thread connections, the M.A. is uncomplicated to assemble/disassemble and inexpensive to redress.
SPECIFICATIONS
Part Number Max OD Min ID Thread
(in) (in)
D96-1168-200 1.687 0.406 1" AMMT
D96-1175-200 1.750
D96-1212-200 2.125 1.5" AMMT
D96-1237-200 2.375 0.625
D96-1287-200 2.875 0.750 2 3/8" PAC
D96-1312-200 3.125 0.812

MOTOR
A positive displacement drilling motor that uses hydraulic horsepower of the drilling fluid to drive the drill bit. Mud motors are used extensively in directional drilling and coiled tubing operations and can be assemble with a variety of power section to meet the customers well conditions. From hot holes to harmful power fluids such as drilling mud or nitrogen. When ordering specify these parameters to provide the best power section do the job quickly and get the most life out of your motors.
SPECIFICATIONS
Part Number Max OD Lobe Stage Flow rate Working
torque 		Rotory speed Thread
(in) L/min N.m R/min
D96-1169-100 1.687 5:6 5.0 90-210 280 390-860 1"AMMT
D96-1169-101 1.687 5:6 3.0 90-170 180 400-720
D96-1212-100 2.125 5:6 6.0 80-190 430 260-640 1 1/2"AMMT
D96-1212-101 2.125 5:6 2.5 110-230 350 200-400
D96-1287-100 2.875 5:6 4.0 90-380 890 100-420 2 3/8"PAC
D96-1287-101 2.875 7:8 4.5 190-470 1045 140-360
D96-1312-100 3.125 5:6 3.5 380-660 1450 230-390

"GS" TYPE RUNNING/PULLING TOOL
The *GS* Type Running/Pulling Tool is designed to run and retrieve downhole tools with conventional internal fish necks. The latching mechanism is a robust dog/core design which releases positively from the internal fish neck when a hydraulic differential is applied to the tool.
The tool does not require shear pins or drop balls since the differential required to activate the tool is provided by circulating through a choke insert in the core.
'GS' Type Running/Pulling Tools are available for all standard internal fish neck sizes.
Features/Benefits:
  • Full hydraulic operation
  • Multiple latch & release capability
  • Proven dog/core design
  • Available to catch internal fish necks from 2" to 7"
  • Safety shear function
SPECIFICATIONS
Part Number Size Max OD Min ID Internal fishneck Thread
(in) (in) (in) (in)
D96-3200-300 2 1.810 0.250 1.375 1" AMMT
D96-3250-300 2 1/2 Casting Steel Wear Parts

Casting Steel Wear Parts


Casting Steel Wear Parts is a kind of wear parts in mining industry.It is widely used in mining industry, metallurgical industry, construction industry, chemical industry and silicate industry for crushing hard and medium hard ore and rock, such as iron ore, limestone, copper ore, sandstone etc.Casting Steel Wear Parts are the replacement of Jaw Crusher ,Cone Crusher ,Gyratory Crusher ,Hammer Crusher and so on.

TyCrusher Parts is the specialized manufacturers from China.our produce High manganese casting liners mainly include Mantle, Bowl Liner, Feed Cone , jaw plate, check plate, Arm Liner , Steel Ball ,and etc, TyCrusher Parts` casting wear parts can suit lots of world famous crushing equipment brand suach as : Nordberg, Telsmith, Terex , Symons, Kleeman, Extec and etc.



Low Alloy Steel Wear Parts,Casting Steel Wear Parts,Crusher Wear Parts,Commercial Alloy Steel Wear Parts

Guangzhou Tianyu Machinery Equipment Co., Ltd. , https://www.tycrusherpart.com