First, the advantages of warmth:
1. Moderately better: The warmth is born from the foot, and the Chinese medicine called the foot the second heart acupuncture dense level set area. As the saying goes: "Cold from the foot of life," This can be very effective on people's rheumatism and other play a very good effect.
2. Space saving: There is no radiator or fan coil and pipe in the room, which increases the area of ​​the building used, improves the effective floor height, and the interior is clean and tidy.
3, relatively low operating costs: This argument, of course, has a lot to do with your use of time, just like the car on the road, warm to the ground is a uniform exercise, has maintained a speed, and the radiator is a will 60M, one will be 80M, and one will be 10M. For the same itinerary, it is certain that uniform speed is the most energy-saving
4. Comfort and hygiene: The ground radiant heating system is one of the most comfortable air conditioning methods. The indoor surface temperature is uniform, the indoor air temperature field distribution is reasonable, and the human body feels comfortable, and the interior is clean and clean, which is beneficial to human health.
5, good stability: due to the large energy storage in the floor and floor heating aluminum foil layer, thermal stability, so even under intermittent operating conditions can maintain room temperature stability
6, long operating life: in line with European standards, the floor heating pipe material can be used continuously for more than 50 years.
Second, the advantages of radiator
1. Fast heating: good radiators begin to emit heat in about 10 minutes and reach the preset temperature in half an hour (20 degrees positive and negative 2)
2, there is no requirement for ground materials: whether it is pb pipe or aluminum plastic composite pipe can do insulation pipe, does not affect the home floor
3, save time: ready to use, no need to wait, save time.
Three, four aspects of the heating radiator:
1, from the installation effect point of view:
Floor heating is a hidden system. Floor heating pipes are buried underground, so it will not affect the decoration of the wall and the placement of furniture. It is not limited by whether the wall can be fixed by the bracket. This advantage is all around the floor glass. The space is particularly obvious, but because floor heating is a system buried underground, the net height of the room will increase. In general, wet floor heating should be increased by 8 cm. The radiators are installed under the windows. They are usually mounted on the surface and pipes are laid under the ground. At present, radiators generally use steel plates, aluminum alloys and copper-aluminum composite radiators, and pipes use copper pipes and PEX pipes. Installation in this way occupies the horizontal space of the room, and the installation of the radiator is limited by whether the wall can be fixed by the bracket.
2, from the heating effect
The heat from the floor heating is uniformly radiated from the bottom up and meets the traditional Chinese medicine theory of “warm foot cool topâ€. On the same level, the temperature of the room is even and the temperature difference is small, which will make people feel comfortable just right. The heating of the radiators is dominated by convection. The radiators dissipate the hot air, so that the cold and warm air in the room can be convected to achieve heating. Radiator heating will increase with the distance between the radiator and the location, and the temperature will decrease. The temperature difference between the same level is larger. This kind of feeling is especially obvious in a large space room. From this perspective, the comfort of the radiator is relatively poor, but it is better than air conditioning and heating.
3, from the thermal efficiency
Slow heating and slow heat dissipation. The radiators are more in line with young people's demand standards.
4, from the perspective of energy efficiency:
The floor heating installation is low-temperature radiation cooling, the required water temperature is lower, and the floor heating has the function of temperature adjustment and temperature control, and may not have any advantage for centralized heating, but for an independent heating system or a centralized heating household metering system, The energy-saving effect is obvious. Radiator belongs to air convection heat dissipation, the required water supply temperature is higher, and most of the heating is without temperature control device, even if there is a heating and control system, the energy-saving effect is still not obvious, and floor heating than the heating energy-saving 30%.
Shanghai Shure Environmental Technology Co., Ltd. Tel
Sand Making Machine used to produce artificial sand & plaster sand; sand manufactured by crushing,The sand making machine is specially designed for manufacturing artificial sand from the grit. It is a better utilization of the large size of rock materials and stones through rock on rock metal machine mechanism roughly as follows-
Sand and gravel aggregate play an important role in making up building materials like concrete, which makes the separation and screening process extremely necessary.
Sand making production line is also called sand and stone production line. And the sand production line is a kind of special equipment for producing construction sand and stone. The sand making machine for sale is often needed in many fields, and this processing line can meet the requirements of simultaneous production of stone and artificial sand.
The sand manufacturing plant can crush rock, sand, gravel and other materials into various size in accord with the requirement of construction sand. Sand made by sand production line has uniform size and high compression strength, and this kind of sand is much more in line with the construction requirements than the sand processed by the ordinary hammer sand crusher machine.
Three Systems of Sand Plant Equipment:
sand plant mainly has three systems. Here is their basic information:
Firstly, the feeding system. The system send raw material to sand crusher and sand screening machine. According to crush and screen process, feeding equipment includes vibrating feeder and other types of feeding machines.
Secondly, the crushing system. The system is the heart of the whole set of sand processing equipment. The work of sand crushing plant system is to crush different varieties of ore raw materials into the required size of the finished product. A complete stone production line includes many crushers. These crushing machines have different functions, and complete the crushing operation together.
Thirdly, the screening and transporting system. The system screens the ore which are crushed by crushing machinery. In the compound sand and stone production line, sand and stone need to be separated, and the separated material needs to be transported to the respective site. The sand screening equipment used in this process is generally a Linear Vibrating Screen or other sand sieve machine.
Sand Making Machine,Sand Making Equipment,Sand Crusher Machine,Sand Crusher
Shenyang Sanland Mining Equipment Manufacture Co., Ltd. , https://www.sanlandcrushers.com