D641F-16P
Specifications:
Size: DN50-1200
Body: Cast Steel, Stainless Steel
Disc: CF8/ CF8M/ WCB
Seat: NBR/EPDM/PDFE /VITON
Color: Any color according to customer requirement
Working pressure: PN10/ 16/150lb
Flange standard: PN10/ 16/ ANSI150
Brief introduction for butterfly valve
1. Flanged butterfly valve, designed to comply with MSS-SP-67, BS5155, and API609. Compatible with GB, DIN, BS, ANSI flanges. Face to face according to ISO 5752.
2. Characteristic of wafer type spline butterfly valve is to splice the rubber liner on the body, the strength more highly and the seal more reliably for the seat.
3. The spline is between the shaft and disc.
4. Available in size DN50---DN1200
5. Available with handles, manual gear operators, and electric or pneumatic actuators
Pneumatic Actuator Butterfly Valve (WCB/PTFE/SS304)
D641F-16P
Specifications:
Size: DN50-1200
Body: Cast Steel, Stainless Steel
Disc: CF8/ CF8M/ WCB
Seat: NBR/EPDM/PDFE /VITON
Color: Any color according to customer requirement
Working pressure: PN10/ 16/150lb
Flange standard: PN10/ 16/ ANSI150
Brief introduction for butterfly valve
1. Flanged butterfly valve, designed to comply with MSS-SP-67, BS5155, and API609. Compatible with GB, DIN, BS, ANSI flanges. Face to face according to ISO 5752.
2. Characteristic of wafer type spline butterfly valve is to splice the rubber liner on the body, the strength more highly and the seal more reliably for the seat.
3. The spline is between the shaft and disc.
4. Available in size DN50---DN1200
5. Available with handles, manual gear operators, and electric or pneumatic actuators
There are many types of photovoltaic power piling machines, and the working principle of each type is different. Photovoltaic power piling machine can basically be divided into hydraulic piling machine, drop hammer piling machine, steam hammer piling machine, diesel hammer piling machine, in which steam hammer photovoltaic piling machine often needs supporting the use of screw air compressor.
The machine is suitable for piling works such as building foundation construction, high-speed road foundation reinforcement, high-speed railway power facilities, wind power plants, solar photovoltaic power plants, soft soil treatment and reinforcement.
Hydraulic PV power Pile Driver is a multi-purpose highway guardrail steel pipe pile Construction Machinery. With hydraulic pressure as the driving force, the hydraulic pressure can be adjusted according to different soil conditions in the stratum to achieve appropriate impact force for driving. It is a new type of pile driver. According to different configurations, steel pipe piles can be driven in, pulled out, or drilled on the subgrade and stabilization layer before being piled.
Drop Hammer Photovoltaic Power Pile Driver is a kind of pile tube sinking equipment. It has the advantages of simple design, easy installation and transportation, high impact force, stable performance and so on. It is a steel weight, which is lifted by the hoisting machine, and it is lifted off the trailing guide frame. Freefall and piling. All use electric power, without having to buy expensive diesel power.
The main body of the diesel hammer pile driver is also composed of a cylinder and a plunger. The cylinder type diesel hammer uses the cylinder as a hammer seat and directly guides the inner wall of the extended cylinder barrel, eliminating two guide rods. The plunger is a hammer head, which can be The cylinder moves up and down. Its working principle is similar to that of a single-cylinder two-stroke diesel engine. The diesel hammer has a fuel injection pump, a fuel tank, a cooling water tank, and a pile cap attached to the hammer seat. The gap between the plunger and the cylinder is sealed with a resilient plunger ring.
Specification
Drill depth :0-9m
Drill diameter :50-900mm
Geological requirements:soil or soft rock
Photovoltaic Pile Driver
Photovoltaic Pile Driver,Hydraulic Photovoltaic Pile Driver,Photovoltaic Solar Pile Driver,Photovoltaic Pile Driver With Crawler
Shandong Hengwang Group Co., Ltd , https://www.hwmac.com